Car Parking – Spartan

Features

  • These are typical vertical. transportation systems for the cars
  • There are two types of systems that we have:
    – TRACTION TYPE – If the Travel is more than 20 mtrs.
    – HYDRAULIC TYPE – Up to Travel 20 mtrs.
  • The car lift allows the human transportation along with the car to
    reach from one level to other.
  • Where there are mix pattern parking arrangement given by customer instead of a civil ramp, dedicated car lifts are used and
    there are multiple floors used for parking the vehicles.
  • This system can be given 2 Ton,2.5 Ton & 3 Ton capacity
  • This is PWD certified product with all the required compliances
    inbuilt such as:
    – ARD Devices
    – Safety governor
    – Two side operating panel
  • Emergency switch for STOP.
  • The ceiling fan with internal lights.
  • Intercom for communication in case of urgency.
  • Safety sensors for internal working envelope of the car cabin especially for the length.
  • Car cabin individual doors.
  • Floor doors separate from Operating panel.
  • GREEN and RED light at every floor.
  • Overload safety mechanism.
  • Buffer springs in the lift pit.
  • Electrical points and illuminated RCC shaft with white wash.
  • The doors can be given in SS finish or can be powder coated, with 2
    panel/3 panel/vertical opening/horizontal opening.
  • The car cabin also can be given in SS finish or can be powder coated.

Special Features

Signalization
  • Surface mounted LOP
  • Dot Matrix/ LCD display
  • Surface mounted LOP
  • Dot Matrix/ LCD display

Special Sensors

Radar Sensor

  • Auto landing call book .
  • Radar sensor to make the elevator smarter by controlling the doors based on human presence and direction of movement detection.
  • Additionally, radar has a huge advantage over PIR sensors as it detects the direction of movement so that it only opens the door whenever necessary.

Car Position Sensor

  • It ensure car in right position inside cabins.
  • Avoid cars and lift damages.

Through Beam Sensor

  • Large openings are possible as emitter & receiver.

Car Cabin

  • Cabin panel SS 304 Hairline Finish.
  • Flooring – Aluminum Chequered Sheet.
  • IS 14665-2-1 to 2 (2000): Electric Traction Lifts
  • IS 14671 : 1999 HYDRAULIC LIFT

Car & Landing Door

  • Automatic Centre Opening 6 panel Door.
  • Car & Landing door SS 441 Hairline Finish.
  • Standards; EN 81-20/50, ASME A17.1, GB 7588,

Special features 

Automatic Rescue Device( ARD)

In case of a main power supply failure, the lift stopped between two floors is moved to floor level, the automatic door is opened and passengers are out safely, for lifts with automatic door, in case of a main power supply failure at floor level, the door is remain opened.

Emergency Alarm

Provided to inform the security when the lift stops.

MP3 Announcement

  • Provided for the guidelines in the lift
  • The device is equipped for announcing floors and additional messages such as the opening and closing of doors, as well as indicating the direction of the lift.

Power Saving V3FDRIVES

  • Smooth starting.
  • Smooth acceleration & deceleration time.
  • Stopping methods.
  • Reversal of motor.
  • Reduce harmonics.
  • Increase power factor.
  • Provided for save electricity when lift running

Over Speed Governor

An over speed governor is one of the components of such a safety system. It acts as a stopping mechanism when the elevator car reaches an excessive velocity, known as tripping speed. When the tripping speed is reached, the over speed governor is mechanically locked and halts the rope, thus stopping the elevator car.

Car Lift Machine

Control Panel

All switch gear used electrical control panel design as per IEC 61439 standard.
All cables & wires are of standard make.

Roller Guide Shoe

Roller guide arrangement consisting of a suspension-tyre system on guide rail section. 4 set of spring loaded guide wheels with hard runner coating gives smooth and jerk less ride by sliding over the guide rails.Unlike guide shoes, these guide wheels doesn’t require any lubrication

Buffer Spring

The Buffer spring is designed to absorb high compressive force within a small space and it has made up with wound flat steel wire. It can withstand very high impact load. Oil Buffer spring force selected as per speed and load of the cabin and counter weight hence it with stands the load and gives minimum bouncing effect.

Usha Martin Wire Rope used for Lifting Pallet

Excellent resistance to fatigue, wear and abrasion, confirmed by laboratory testing and field experience. A few key factors for preferring the Usha Martin brand are Accident-free performance ensuring maximum human safety & has longer service life.

Guide Rail

The high strength guide rail bracket means the part of guide fixing which carries the guide seating or bolts and forged guide clips and serves to secure them to building or structure. Rails come with anti rust coating which prevents rusting.

  • Signal lights (Ip65)
  • Operating panel including positioning indicator
  • Call button panel
  • LED ceiling light panel
  • Shaft wall due to front & rear-opening design
  • Light barriers for car detection
  • Light grid in entry area
  • Cabin floor and cover strips
  • Cabin ceiling/cabin walls
  • Lift door/door models

Special features 

SegmentCar Parks
Max. Travel (m)100 (solutions available for higher travel)
Max. Load (kg)1000 - 4000 kg
Max. speed (m/s)1.0 mps (solutions available for other speeds)
Cabin, Car Door and Landing Door FinishSS standard MS Powder coated optional